How to Apply

Preparation:

Way one– Using masking tape (For matt tile)

1. stick the masking tape along the edge of the tile;
2. Remove the lid, and place the tube in the glue gun;
3. attach nozzle. Cut nozzle at 45°angle to the required size(less than the width of the gap);
4. press the glue gun, squeeze out 40mm, then left them away to avoid uncured when applied;
5. apply with steady pressure, ensuring sealant is pushed into the joint;          
6. use a ball shape tool to press into the joint within 5 minutes;
7. remove the taper immediately when apply finished.

1. For ceramic tile
2. Same as above from step 2-7, then following:
3. remove the excess by schleifer after approx 3-10 hours, depends on temperature;